What the EPDM roof price depends on

There is no single price per square metre: two roofs of the same size can cost very differently. These are the factors.

1. Area and shape

A large, simple roof can be covered with a few sheets – RubberGard sheets are up to 15.25 m wide. More corners, levels and penetrations mean more work.

2. Deck and old covering

Concrete, steel deck or timber. Whether the old covering can stay or must come off – see flat roof repair.

3. Insulation

Whether a vapour control layer is needed and how thick the insulation should be. That depends on the building and on how the rooms under the roof are used.

4. Fixing method and membrane thickness

Fully adhered, mechanically attached or ballasted. Usually 1.1 mm is enough; green roofs and roofs with solar panels use 1.5 mm. All options: roof systems.

5. Upstands and details

Length of parapets and walls, pipes, vents, drains and roof edges. Each detail is built separately: details.

6. Access and season

Building height, lifting materials to the roof and weather. Contact adhesive is applied at 5 °C or above; for cold weather there is the self-adhesive RubberGard SA membrane.

What to send for a quote

• the address or town;
• roof measurements or the approximate area;
• a few photos of the roof, upstands and drains;
• what is on the roof now (roofing felt, bitumen membrane, other);
• whether the roof also needs insulating.

Get a quoteWhatsApp

© 2026 EPDMJUMTS.LVPowered by AK31 Lab

HomeRoof systemsDetailsMaterialsHow a seam is madeFAQFlat roof repairEPDM roof costContactsPrivacy notice

EPDM vs bitumen and PVCFlat roof insulationNew-build flat roofGreen roofRoof for solar panelsIndustrial and warehouse roofsGarage roofUnderground car parksResidential roofsHangar roofsModular building roofs